Engl E630II Savage 60 MARK II 60W Head, Custom Purple Bronco, Various Configurations

Engl E630II Savage 60 MARK II 60W Head, Custom Purple Bronco, Various Configurations

$1,160.00$4,495.00

1 in stock

-

A true classic in the world of amp heads in its latest and best reincarnation, the Savage 60 MKII amp is simply incomparable when it comes to dynamics and flexibility.

SKU: N/A Categories: , Brand:

Description

A true classic in the world of amp heads in its latest and best reincarnation, this amp is simply incomparable when it comes to dynamics and flexibility. The Mark II includes some incredible new inner developments, as well as a bunch of new features. The MIDI port is now included as standard, as well as a finely tuned and sensitive-responding noise gate – so you’ll not be disrupted by extraneous noise, even at extreme gain settings.

Our iconic amplifier designer, Horst Langer, has also reworked the 3-band EQ from Channel 1 and Channel 2, which come freshly voiced and equipped with Lean/Bold circuits for two different mids characters. Also new is the Gain Lo/Hi circuit, where the Clean channel becomes “Crunch” in “Hi” mode, and the Lead channel gets even fatter and heavier. Four channels, tons of sound-shaping features and truly thunderous tones make the SAVAGE Mark II the perfect sound center for a modern guitar rig.

Features:
  • 4 Channels: Clean, Crunch I, Crunch II, Lead
  • All Tube Head
  • 2 Tube buffered FX Loops (each with Balance control)
  • Noise Gate
  • Master A/B
  • Power Tube Monitor
  • Ground Lift Switch
  • MIDI: MIDI in / MIDI thru
  • Engl Midi-Footcontroller Phantom Power Switch
  • MIDI Channel Assignment and Controller Enable Switches
  • Write / Copy (for MIDI programming)
  • All functions accessible on the front panel are MIDI programmable
  • S.A.C.: Serial Amp Control
  • Custom Purple Bronco finish
Sound Options:
  • Input Lo/Hi
  • Bright
  • Preshape
  • Contour (Clean, Crunch I)
  • Mid Le./Bo.
  • Depth Boost
  • Gain Lo/Hi
  • Contour (Crunch II, Lead)
  • Rough / Smooth
Controls:
  • Gain (for each Channel)
  • Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I)
  • Bass, Middle, Treble, Tone Balance (Crunch II, Lead)
  • Volume (for each Channel)
  • Presence B
  • Master A
  • Master B
  • Noise Gate Threshold Level
  • FX Loop I Balance
  • FX Loop II Balance
Outputs:
  • Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||)
  • Line Out
Footswitch (Available As Add-On):
  • Z4 (Channels)
  • Z9 (Master A/B, Rough/Smooth, Input Lo/Hi, Preshape, Gain Lo/Hi, Bright, Noise Gate, Presence A/B, Depth Boost, Contour Main Channel I, Mid Lean/Bold, Contour Main Channel II, FX Loop I/II)
  • Z12
  • Z15
Preamp Tubes:
  • 6 x Engl ECC83 / 12AX7
Output Tubes:
  • 2 x Engl EL34
Output Wattage:
  • 60 W

Dimensions:

  • 71 x 27 x 29 cm
Weight:
  • 21 kg

Cab Options:

Engl E212VHB Speaker Cab

The perfect solution for a small setup. Compact in size but big in sound, the E212VB’s Celestion Vintage 30 speakers offer solid bass foundations and silky highs. The cab can be operated either in mono (120 watts) or stereo mode (2 x 60 watts). The solid housing, made of 14-ply birch plywood, is built for eternity and 100% roadworthy. Despite the diminutive dimensions, the E212VHB has utterly convincing bass reserves on tap!

Features:
  • Straight Front
  • Closed Back
  • Solid Siberian Birch (14 times folded) Construction
  • Parallel Input and Thru for Daisy Chaining
  • Solid hand welded Metal Grille
  • Custom Purple Bronco Finish
Speaker:
  • 12″ Celestion Vintage 30
Power Handling:
  • 120 W (mono)
  • 2 x 60 W (stereo)
Impedance:
  • 8 Ω (mono)
  • 2 x 16 Ω (stereo)
Dimensions:
  • 74 x 48 x 36 cm
Weight:
  • 33 kg

Engl E412VGB Speaker Cab

The E412VGB is a classic representative of its craft: a straight 4×12 cabinet with the typical sound dispersion and a look that has been defining rock stages of the world for over 50 years. Equipped with four Celestion Vintage 30 speakers, this cab is a lesson in guitar tones you know and love: mid-oriented, complex distorted structures, and a solid bass foundation with silky highs are the order of the day. This cab can be operated either in mono (240 watts) or stereo mode (2 x 120 watts). The housing, made of 14-ply birch plywood, is built to last, and is 100% solid and roadworthy.

Features:
  • Straight Front
  • Closed Back
  • Solid Siberian Birch (14 times folded) Construction
  • Parallel Input and Thru for Daisy Chaining
  • Solid hand welded Metall Grille
  • Custom Purple Bronco finish
Speakers:
  • 12″ Celestion Vintage 30
Power Handling:
  • 240 W (mono)
  • 2 x 120 W (stereo)
Impedance:
  • 8 Ω (mono)
  • 2 x 16 Ω (stereo)
Dimensions:
  • 74 x 75 x 36 cm
Weight:
  • 52 kg

Additional information

Weight 1 lbs
Configuration

Head, Head & 212 Cab, Head & 412 Cab, E212VHB Cab, E412VGB Cab

You may also like…

Title

Go to Top