Can an extremely successful amp like the original Invader be improved at all? The answer is: yes! Meet the Invader II. If you’re on the hunt for peerless tones and variety, the Invader II gives you a flexibility that is second to none. A whopping number of 16 (yes, 16!) sounds are the base from which you can discover new worlds of sound. You can also optionally use the Sound Wizard Module (SWM Z16) with the Invader II – a slot and connection port on the back of the amp are ready for this purpose. Using the Z16’s 96 micro rocker switches, you can comprehensively tweak your tones at any gain setting… it’s a dream come true for all tone hunters! And if you’re wondering where the 16 ‘base’ sounds come from: there’s four channels, each with low and high gain modes (for a total of eight sounds), plus the Sound switch, which alters your tone based on your channel and gain settings (and making for a total of 16!). All this is, of course, controllable via MIDI, and with a 3-band EQ per channel, noise gate and comprehensive connection options on-board, there’s nothing the Invader II can’t do!

Head And Cab in Custom Silver Bronco finish!


  • 4 Channels: Clean, Crunch, Lead 1, Lead 2
  • All-Tube Head
  • 2 Tube Buffered FX Loops (Each With Balance Control)
  • Noise Gate
  • Master A/B
  • Power Tube Monitor
  • Connection Port For the Optional ENGL Z16 Sound Wizard Module
  • Ground Lift Switch
  • MIDI: Midi In / MIDI Thru
  • Engl MIDI-Footcontroller Phantom Power Switch
  • MIDI Channel Assignment And Controller Enable Switches
  • Write / Copy (For MIDI Programming)
  • All Functions Accessible On The Front Panel Are MIDI Programmable
  • S.A.C.: Serial Amp Control

Sound Options:

  • Sound
  • Hi Gain
  • Sound Wizard Module (Optional)


  • Gain (For Each Channel)
  • 3-Band EQ (For Each Channel)
  • Volume (For Each Channel)
  • Presence
  • Depth Punch
  • Master A
  • Master B
  • Noise Gate Threshold Level\
  • Low / High Gain Volume Ratio Control (For Each Channel)
  • FX Loop I Balance
  • FX Loop II Balance


  • Poweramp Output (1×4Ω, 1×8Ω, 1×16Ω, 2×8Ω || 2×16Ω ||) – Pre Output – Line Out

Footswitch (Available As Add-On):

  • Z4 (Channels)
  • Z9 (Master, A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX, Loop)
  • Z12
  • Z15

Preamp Tubes:

  • 4x Engl ECC83/12AX7

Output Tubes:

  • 4x Engl KT77

Output Wattage:

  • 100W


  • 71x27x29cm


  • 22.5kg

Engl EV212VHB Cabinet

The perfect solution for a small setup. Compact in size but big in sound, the E212VB’s Celestion Vintage 30 speakers offer solid bass foundations and silky highs. The cab can be operated either in mono (120 watts) or stereo mode (2 x 60 watts). The solid housing, made of 14-ply birch plywood, is built for eternity and 100% roadworthy. Despite the diminutive dimensions, the E212VHB has utterly convincing bass reserves on tap!


•Straight Front
•Closed Back
•Solid Siberian Birch (14 Time Folded) Construction
•Solid Hand-Welded Metal Grille


•12” Celestion Vintage 30

Power Handling

•120W (Mono)
•2x60W (Stereo)


•8Ω (Mono)

•2×16Ω (Stereo)